Power Generation Using Speed Breaker
Keywords:
Electrical generator, Energy from kinetics, Non-traditional energy, Shaft and pinion shifting, Speed interrupter, Street lightAbstract
In the modern world, power has become indispensable to human existence. Energy is responsible for significant shifts in the financial status of every nation. Conventional forms of energy supply the majority of the energy generated in the modern world. However, the human population is growing rapidly, and the sources of regular electricity are running out. Additionally, these traditional energy sources promote contamination and a warming planet. Consequently, the development of sustainable, eco-friendly, and clean nonconventional sources for power generation is required. Here, we suggest a sustainable, unconventional power supply that is dependent on pioneers. Through the use of the jerking pressure that is wasted when a car passes a speed limit on the side of the road, we hope to brighten the streets. Utilizing the velocity limiter as a power source generating unit, we may harness the energy produced by moving cars and generate electricity. By means of an axle and sprocket system, the momentum of driving automobiles may be transformed into mechanical energy. The street lights will be powered by means of a generator, which can convert mechanical electricity into electrical electricity. Therefore, by using this method, we can conserve a lot of energy and satisfy our future demands.
References
K. M. Ullah, K. M. Ahsan-uz-Zaman, S. Hosen, R. H. Khan and S. Parvin, “Electrical power generation through speed breaker,” 2016 9th International Conference on Electrical and Computer Engineering (ICECE), Dhaka, Bangladesh, 2016, pp. 30-33, doi: https://doi.org/10.1109/icece.2016.7853848
A. A. Al Ahmadi et al., “Power generation through road speed breakers—An experimental approach,” 2018 Advances in Science and Engineering Technology International Conferences (ASET), Dubai, Sharjah, Abu Dhabi, United Arab Emirates, 2018, pp. 1-6, doi: https://doi.org/10.1109/ICASET.2018.8376796
S. Srinivas Raju, H. Naresh, and N. Raghuvardhan, “Design and Fabrication of A System for Harnessing Energy From Road Traffic,” Materials Today: Proceedings, vol. 5, no. 2, pp. 6189–6194, 2018, doi: https://doi.org/10.1016/j.matpr.2017.12.226
M. Iswarya and G. R. P. Lakshmi, “Generation of electricity by using speed breakers,” 2017 IEEE International Conference on Power, Control, Signals and Instrumentation Engineering (ICPCSI), Chennai, India, 2017, pp. 896-899, doi: https://doi.org/10.1109/ICPCSI.2017.8391841
A. P. Rao, A. K. Kumar and S. Suresh, “Power generation from speed breaker by rack and ratchet mechanism,” International Journal of Current Engineering and Technology, 2014. Available: https://inpressco.com/wp-content/uploads/2014/02/Paper104549-552.pdf
H. Kanma, N. Wakabayashi, R. Kanazawa, H. Ito, “Home appliance control system over bluetooth with a cellular phone,” IEEE Transactions on Consumer Electronics. Vol. 49, no. 4, pp. 1049-1053, Nov. 2003 https://ieeexplore.ieee.org/abstract/document/1261194
M. E. Hossain, M. R. Hasan, K. T. Ahmed and M. N. M. Shawon, “Design and performance of power generation using speed breaker with the help of rack and pinion mechanism,” 2017 4th International Conference on Advances in Electrical Engineering (ICAEE), Dhaka, Bangladesh, 2017, pp. 7-11, doi: https://doi.org/10.1109/ICAEE.2017.8255317
M. F. B. Bintu, M. W. Ullah, M. I. Hossain, M. M. A. Faisal and M. F. Rahman, “Hybrid power generation using speed breaker,” 2022 International Conference on Innovations in Science, Engineering and Technology (ICISET), Chittagong, Bangladesh, 2022, pp. 457-461, doi: https://doi.org/10.1109/ICISET54810.2022.9775863
D. Ahuja and M. Tatsutani, “Sustainable energy for developing countries,” S.A.P.I.EN.S. Surveys and Perspectives Integrating Environment and Society, vol. 2, no. 1, 2009, Available: https://journals.openedition.org/sapiens/823
C. K. Das, S. M. Hossain and M. S. Hossan, “Introducing speed breaker as a power generation unit for minor needs,” 2013 International Conference on Informatics, Electronics and Vision (ICIEV), Dhaka, Bangladesh, 2013, pp. 1-6, doi: https://doi.org/10.1109/ICIEV.2013.6572532
P. Fairley, “Speed bumps ahead for electric-vehicle charging,” in IEEE Spectrum, vol. 47, no. 1, pp. 13-14, Jan. 2010, doi: https://doi.org/10.1109/MSPEC.2010.5372476
Soumya L M, Rashmi M N, Shashikala N, “Electrical power generation using speed breaker mechanism: An innovative approach to energy harvesting,” International Research Journal on Advanced Engineering Hub (IRJAEH), vol. 2, no. 11, Nov. 2024, Available: https://irjaeh.com/index.php/journal/article/view/421
R. Gupta, S. Sharma, and Saurabh Gaykawad, “A revolutionary technique of power generation through speed breaker power generators,” International Journal of Engineering Research & Technology, vol. 2, no. 8, Aug. 2013, Available: https://www.ijert.org/a-revolutionary-technique-of-power-generation-through-speed-breaker-power-generators
A. S. Fawade, “Air compression and electricity generation by using speed breaker with rack and pinion mechanism,” International Journal of Modern Engineering Research (IJMER), vol. 5, no. 1, Jan. 2015, pp. 23-28. Available: https://www.ijmer.com/papers/Vol5_Issue1/Version-3/C0501_03-2328.pdf
H. C. Mat Haris, M. A. N. M. Nor, M. H. Fazalul Rahiman and N. F. A. A. Rahman, “Development of energy harvesting using speed breaker,” 2016 IEEE Conference on Systems, Process and Control (ICSPC), Melaka, Malaysia, 2016, pp. 53-57, doi: https://doi.org/10.1109/SPC.2016.7920703
E. Vijay, K. Yadav, Durgesh, S. Prajapati, and A. Porwal, “Electric power generation through speed breakers,” International Advanced Research Journal in Science, Engineering and Technology, vol. 7, no. 2, 2020, Available: https://iarjset.com/wp-content/uploads/2020/02/IARJSET.2020.7202.pdf
S. Karpe and Sanjay Deokar, “Predictive controller strategies for using inverter based electrical drives system,” Int. J. Emerg. Sci. Eng. (IJESE), vol. 12, no. 7, Jan. 2024, doi: https://doi.org/10.2139/ssrn.4876086
S. R. Karpe, S. A. Deokar, and A. M. Dixit, “Switching losses minimization and performance improvement of PCC and PTC methods of model predictive direct torque control drives with 15-level inverter,” Journal of Electrical Systems and Information Technology, vol. 5, no. 3, pp. 759–776, Dec. 2018, doi: https://doi.org/10.1016/j.jesit.2017.01.009
S. Karpe, S. A. Deokar, and A. M. Dixit, “Switching losses minimization by using direct torque control of induction motor,” Journal of Electrical Systems and Information Technology, vol. 4, no. 1, pp. 225–242, May 2017, doi: https://doi.org/10.1016/j.jesit.2016.08.007
