IoT-Enabled Embedded Sensing for Intelligent E-Waste Management: A Review of Classification, Traceability, and Hazard-Aware Sorting Architectures with a Proposed Edge-Native Integration Framework
Keywords:
Circular-economy electronics, Lithium-ion battery hazard monitoring, On-device machine learning, Radio-frequency identification tagging, Reverse logistics, Smart recycling infrastructure, Urban miningAbstract
Global Electronic-Waste (e-waste) generation is rising far faster than the rate of formally documented collection and recycling, and most Electrical and Electronic Equipment (EEE) end-of-life streams are still sorted manually or diverted to informal, hazard-prone processing routes. Embedded sensing and the Internet of Things (IoT) offer a route to unit-level identification, hazard screening, and traceable reverse logistics that could close part of this gap, yet the underlying research is fragmented across waste-informatics, computer-vision, Radio-Frequency Identification (RFID), and battery-safety communities. This review synthesizes literature on (i) IoT-enabled bin- and facility-level e-waste monitoring, (ii) embedded and edge machine-learning classification of e-waste streams, (iii) RFID-and blockchain-based unit-level traceability, and (iv) embedded hazard sensing for battery-bearing e-waste, and proposes a conceptual edge-native architecture that unifies these strands into a single sorting node. A structured narrative review was conducted across IEEE Xplore, ScienceDirect, SpringerLink, Nature/Scientific Reports, and MDPI, screening publications on IoT waste-monitoring systems, embedded/TinyML classification models, RFID-based EEE traceability, and gas/thermal sensing for lithium-ion battery hazards. Peer-reviewed and technical-report sources are synthesized into comparative tables of embedded classification models, IoT-enabled e-waste and WEEE tracking systems, and existing work benchmarked against the proposed framework; accuracy–footprint trade-offs, a duty-cycled energy budget, a sensing-modality capability profile, and the global generation–recycling gap. The synthesis indicates that formally documented collection and recycling remain below approximately 25% of the more than 60 Mt of e-waste generated annually, that compressed on-device classifiers can retain 85%–90% accuracy at sub-300 kB footprints while narrowing the accuracy gap to cloud-class models to under 6% points, and that no reviewed system combines fill/presence sensing, on-device classification, unit-level identification, and hazard screening within a single power- and latency-constrained sorting node. This review identifies integration, together with standardized unit-level identifiers and connectivity-layer security, as the primary direction for future work.
References
ITU and UNITAR, “Global E-waste Monitor 2024: Electronic waste rising five times faster than documented e-waste recycling,” United Nations Institute for Training and Research, Geneva/Bonn, 2024.
X. L. Helena, M. Ottoni, and L. P. P. Abreu, “A comprehensive review of urban mining and the value recovery from e-waste materials,” Resources, Conservation and Recycling, vol. 190, p. 106840, Mar. 2023.
K. Liu, Q. Tan, J. Yu, and M. Wang, “A global perspective on e-waste recycling,” Circular Economy, vol. 2, no. 1, p. 100028, Feb. 2023.
P. Akhil Rajeev, V. Dharewa, D. Lakshmi, G. Vishnuvarthanan, J. Giri, T. Sathish, and M. Alrashoud, “Advancing e-waste classification with customizable YOLO based deep learning models,” Scientific Reports, vol. 15, May 2025.
M. Echchidmi and A. Bouayad, “TinyML for Sustainable Edge Intelligence: Practical Optimization Under Extreme Resource Constraints,” Technologies, vol. 14, no. 4, p. 215, Apr. 2026.
J. Moosmann, M. Giordano, C. Vogt and M. Magno, "TinyissimoYOLO: A Quantized, Low-Memory Footprint, TinyML Object Detection Network for Low Power Microcontrollers," 2023 IEEE 5th International Conference on Artificial Intelligence Circuits and Systems (AICAS), Hangzhou, China, 2023, pp. 1-5.
I. Sosunova and J. Porras, “IoT-enabled smart waste management systems for smart cities: A systematic review,” IEEE Access, vol. 10, pp. 73326–73363, 2022.
DF703 Smart Waste Bin Sensor, “DF703 Smart Waste Bin Sensor: Ultrasonic fill-level fire tilt monitor for water bin,” Beijing Dingtek Technology Corp.,Ltd., 2026.
L. Fernandes, M. Rosado, Estrela Ferreira Cruz, and S. I. Lopes, “A Review on Adopting Blockchain and IoT Technologies for Fostering the Circular Economy in the Electrical and Electronic Equipment Value Chain,” vol. 15, no. 5, pp. 4574–4574, Mar. 2023.
A. Condemi, F. Cucchiella, and D. Schettini, “Circular Economy and E-Waste: An Opportunity from RFID TAGs,” Applied Sciences, vol. 9, no. 16, p. 3422, Aug. 2019.
A. U. R. Khan and R. W. Ahmad, "A Blockchain-Based IoT-Enabled E-Waste Tracking and Tracing System for Smart Cities," in IEEE Access, vol. 10, pp. 86256-86269, 2022.
S. Karthikeyan, G. S. Rani, M. Sridevi and P. T. V. Bhuvaneswari, "IoT enabled waste management system using ZigBee network," 2017 2nd IEEE International Conference on Recent Trends in Electronics, Information & Communication Technology (RTEICT), Bangalore, India, 2017, pp. 2182-2187.
M. C. Xenya, E. D’souza, K. -O. D. Woelorm, R. Nii Adjei-Laryea and E. Baah-Nyarkoh, "A Proposed IoT Based Smart Waste Bin Management System with An Optimized Route: A Case Study of Ghana," 2020 Conference on Information Communications Technology and Society (ICTAS), Durban, South Africa, 2020, pp. 1-5.
Y. Chu, C. Huang, X. Xie, B. Tan, S. Kamal, and X. Xiong, “Multilayer Hybrid Deep-Learning Method for Waste Classification and Recycling,” Computational Intelligence and Neuroscience, vol. 2018, pp. 1–9, Nov. 2018.
Dr Kai Yang, Lecturer in Energy Materials & Nanotechnology, “Built-in smart sensors can prevent lithium-ion battery fires before they start | University of Surrey,” Surrey.ac.uk, 2025.
P. Raghuwanshi, V. Bhatia, S. Iyer, M. Latva-aho, and O. L. Alcaraz López, “TinyML for On-Device and Edge Analytics in Wireless Networks: A Survey of Deployments, Opportunities, and Concept-Drift Mitigation,” arXiv preprint, 2026.
S. Soro, “TinyML for Ubiquitous Edge AI,” arXiv Preprint, 2021.
M. S. Chaudhari, B. Patil and V. Raut, "IoT based Waste Collection Management System for Smart Cities: An Overview," 2019 3rd International Conference on Computing Methodologies and Communication (ICCMC), Erode, India, 2019, pp. 802-805.
M. Nahiduzzaman et al., “An automated waste classification system using deep learning techniques: Toward efficient waste recycling and environmental sustainability,” Knowledge-Based Systems, vol. 310, p. 113028, 2025.
J. Moosmann, M. Giordano, C. Vogt, and M. Magno, “TinyissimoYOLO: A Quantized, Low-Memory Footprint, TinyML Object Detection Network for Low Power Microcontrollers,” arXiv preprint, 2023.
Araujo et al., “Cost Assessment and Benefits of Using RFID in Reverse Logistics of Waste Electrical & Electronic Equipment (WEEE),” Procedia Computer Science, vol. 55, pp. 688–697, 2015.
C. Liu et al., “RAISE: A Robot-Assisted Selective Disassembly and Sorting System for End-of-Life Phones.” arXiv preprint, 2025.
XRAY, “Gas generation monitoring in lithium ion battery packs,” XRAY Technology Landscape Report, 2026.
A. H. Wheeb and M. F. Khan, “A Survey of Several Machine Learning (ML) Algo-rithms for Security Solution in Internet of Things (IoT) Networks,” Journal of Artificial Intelligence Research & Advances, vol. 12, no. 1, pp. 1–11, 2024.
M. F. K. Barbhuyan, A. H. Wheeb, and M. M. Morshedur, “Exploring the Future of Connectivity: A Comprehensive Review of Wireless and Optical Communications,” in Data-Driven AI: A Multidisciplinary Approach – Techniques, Applications, and Insights from Multiple Domains, 1st ed., CRC Press, 2026, pp. 75–79.
Zheng, “Understanding the WEEE Directive and Its Impact on RFID Tags and Cards - RFID Card,” RFID Card Technical Note, Sept. 21, 2023.
“Thermoplastic Electromagnetic Shielding Materials from the Integral Recycling of Waste from Electronic Equipment,” Polymers (MDPI), vol. 15, no. 18, p. 3859, 2023.
Md. W. Rahman, R. Islam, A. Hasan, N. I. Bithi, Md. M. Hasan, and M. M. Rahman, “Intelligent waste management system using deep learning with IoT,” Journal of King Saud University - Computer and Information Sciences, vol. 34, no. 5, pp. 2072–2087, May 2022.
