Solar-Operated Grass Cutter
Keywords:
DC motor, Electric motor, Grass cutter, Internet of Things (IoT), Solar powerAbstract
A solar-operated grass cutter is a device that uses solar energy to power its cutting mechanism. It serves as a great eco-friendly alternative to traditional grass cutters. The grass cutter’s cutting blades are powered by electrical energy produced by the solar panels which capture sunshine. This implies that you can keep it operating without depending on electricity or fuel. A solar operated grass cutter is a cutting-edge, environmentally conscious tool designed to provide efficient lawn care while minimizing the ecological footprint. Unlike traditional gas-powered lawnmowers that rely on fossil fuels and contribute to air and noise pollution, solar-powered grass cutters harness the sun’s energy to operate, offering a more sustainable and green solution for maintaining yards, gardens, and lawns. A solar-operated grass cutter is not just an innovation in lawn care technology but also a step toward a more sustainable and responsible approach to maintaining our outdoor spaces. It is a great way to maintain your lawn while staying environmentally conscious.
References
N. Ramesh and V. Vanitha, "Solar-powered battery charging system with maximum power point tracking," in Proc. 2018 4th Int. Conf. on Electrical Energy Systems (ICEES), Feb. 2018, pp. 364-368. [Online] Available: https://ieeexplore.ieee.org/abstract/document/8442362.
N. A. Zaini, N. Zaini, M. F. A. Latip, and N. Hamzah, "Remote monitoring system based on a Wi-Fi controlled car using Raspberry Pi," in 2016 IEEE Conference on Systems, Process and Control (ICSPC), Bandar Hilir, Malaysia, Dec. 2016, pp. 58–63. [Online] Available: https://ieeexplore.ieee.org/document/7920734.
A. Kumar, S. Santhosh, and R. D'souza, "Feeder Weeder for autonomous farming," in 2018 3rd IEEE International Conference on Recent Trends in Electronics, Information & Communication Technology (RTEICT), May 2018, pp. 2574–2578. [Online] Available: https://ieeexplore.ieee.org/document/9012340.
Z. I. Rizman, J. Adnan, F. R. Hashim, I. M. Yassin, A. Zabidi, F. K. Zaman, and K. H. Yeap, "An improved controller for grass cutting application," Journal of Fundamental and Applied Sciences, vol. 10, no. 1S, pp. 806–815, Mar. 2018. [Online] Available: https://www.ajol.info/index.php/jfas/article/view/168467.
N. K. Raghavendra and K. Padmavathi, "Solar charge controller for lithium-ion battery," in Proc. 2018 IEEE Int. Conf. on Power Electronics, Drives and Energy Systems (PEDES), Dec. 2018, pp. 1-5. [Online] Available: https://ieeexplore.ieee.org/abstract/document/8707743.
A. D. More, S. N. More, V. V. Shetty, and S. V. Patil, "A portable and automatic weed cutter device," IOSR Journal of Electrical and Electronics Engineering, vol. 1, pp. 14-17, 2017. [Online] Available: https://www.iosrjournals.org/iosr-jeee/Papers/Conf.17018-2017/Volume-1/3.%2014-17.pdf.
R. Sivagurunathan, L. Sivagurunathan, J. Chia, and J. Hao, "Design and fabrication of low-cost portable lawn mower," Scholars Journal of Engineering and Technology, vol. 5, no. 10, pp. 584–591, Oct. 2017. [Online] Available: https://hal.science/hal-01691772/.
M. M. Rahman, M. N. Rahman, and R. Hasan, "Design and Fabrication of a Solar Powered Lawn Mower," presented at the Int. Conf. Mech. Eng. Renew. Energy (ICMERE), Chittagong, Bangladesh, Dec. 18–20, 2017. [Online] Available: https://cuet.ac.bd/icmere/files2017f/ICMERE2017-PI-376.pdf.
L. Huan, W. Dahu, Z. Tong, and H. Keming, "Research on a remote control vehicle," in Proc. 2010 2nd Int. Conf. on Education Technology and Computer, Jun. 22, 2010, vol. 2, pp. V2-263. [Online] Available: https://ieeexplore.ieee.org/abstract/document/5529390.
J. Cai, J. Wu, M. Wu, and M. Huo, "A Bluetooth toy car control realization by Android equipment," presented at the 2011 International Conference on Consumer Electronics, Communications and Networks (CECNet), Xianning, China, Apr. 2011 [Online] Available: https://ieeexplore.ieee.org/document/6199712.
T. M. Baloch and T. T. C. Kae, "Design and modelling a prototype of a robotic lawn mower," in 2008 International Conference on Computer and Communication Engineering, Kuala Lumpur, Malaysia, May 2008, pp. 898–902. [Online] Available: https://ieeexplore.ieee.org/document/4631924/.
